Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP1800-0AB20-3SX5

2LP1800-0AB20-3SX5

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 4; Positioning: Transverse; Design: A; Rated torque: 6,300 Nm; Ratio: 10.964; Dynamic load rating of axial bearing Cdyn: 1,370 kN;

Similar items in same category:
2LP1440-0PL34-2KD8 2LP1440-0PL34-2KD8 FLENDER MUD PUMP TYPE S1HZ SIZE 1320; AXIAL DISTANCE: 1320 MM; RATIO = 8.368; NOMINAL TORQUE PER LOW-SPEED SHAFT = 95,500 NM; MAX. INPUT SPEED = 1600 1/MIN; GEOMETRY OF HIGH-SPEED SHAFT: D107.808X123.14, 2GRD58'53''; GEOMETRY OF LOW-SPEED SHAFT: D230MM;
2LP1732-1GW10-2WU6 2LP1732-1GW10-2WU6 FLENDER HELICAL GEAR UNIT WITH EXTENDED DISTANCE BETWEEN AXLES; TYPE: K3SH, SIZE: 121; TORQUE SUPPORT: FOUNDATION LINE-UP; DESIGN: I; RATED TORQUE: 420,000 NM; RATIO: 56.314; BEARING-MODEL: HEAVY DUTY BEARINGS;
2LP1732-5KA61-4HU4 2LP1732-5KA61-4HU4 FLENDER Helical gear unit with longer overall c nter distance; Type: K4PH, Size: 2300; Torque arm: Foundation mounting; Version: PH; Rated torque: 900,000 NM; Transmission ratio: 68.381; Rolling-contact bearing version Heavy load bearings;
2LP1800-0AA26-4FP4 2LP1800-0AA26-4FP4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 6.319; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM;
2LP1800-0AB33-5VS7 2LP1800-0AB33-5VS7 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 4; Positioning: Transverse; Design: B; Rated torque: 6,300 Nm; Ratio: 10.964; Dynamic load rating of axial bearing Cdyn: 1,370 kN;
2LP1800-0AB45-3EX2 2LP1800-0AB45-3EX2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 7.778; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM;
2LP1800-0AC10-2SC1 2LP1800-0AC10-2SC1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 8.485; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM;
2LP1800-0AC64-2EG0 2LP1800-0AC64-2EG0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 4; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 9.722; NOMINAL TORQUE AT LOW-SPEED SHAFT = 6,300 NM;