Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP1440-0AA01-4LP7

Manufacturer: SIEMENS

Price: On Request

FLENDER MUD PUMP TYPE S1HZ SIZE 1050; AXIAL DISTANCE: 1050 MM; RATIO = 2,241; NOMINAL TORQUE PER LOW-SPEED SHAFT = 23540 NM; MAX. INPUT SPEED = 1600 1/MIN; GEOMETRY OF HIGH-SPEED SHAFT: D160MM; GEOMETRY OF LOW-SPEED SHAFT: D230MM;

Similar items in same category:

	2LP1210-0GS61-3HG5	FLENDER Planetary gear unit; Type: P2MT, Size: 330 HT; Shaft arrangement: 500; Maximum motor stall torque: 42,300 Nm; Maximum wheel load: 1,939 kN; Rotation speed range of high speed shaft: 0 - 3,350 rpm; Ratio: 40.469;
	2LP1210-0PL32-6QP1	FLENDER Planetary gear unit; Type: P2MT, Size: 240; Shaft arrangement: 500; Maximum motor stall torque: 26,000 Nm; Maximum wheel load: 1,374 kN; Rotation speed range of high speed shaft: 0 - 3,350 rpm; Ratio: 39.977;
	2LP1440-0AA00-0AA0	FLENDER MUD PUMP TYPE S1HZ SIZE 1050; AXIAL DISTANCE: 1050 MM; RATIO = 2,241; NOMINAL TORQUE PER LOW-SPEED SHAFT = 35894 NM; MAX. INPUT SPEED = 1600 1/MIN; GEOMETRY OF HIGH-SPEED SHAFT: D160MM; GEOMETRY OF LOW-SPEED SHAFT: D230MM;
	2LP1440-0AA00-0AQ2	FLENDER MUD PUMP TYPE S1HZ SIZE 1050; AXIAL DISTANCE: 1050 MM; RATIO = 2,241; NOMINAL TORQUE PER LOW-SPEED SHAFT = 35894 NM; MAX. INPUT SPEED = 1600 1/MIN; GEOMETRY OF HIGH-SPEED SHAFT: D160MM; GEOMETRY OF LOW-SPEED SHAFT: D230MM;
	2LP1440-0AA01-4TP7	FLENDER MUD PUMP TYPE S1HZ SIZE 1050; AXIAL DISTANCE: 1050 MM; RATIO = 2,241; NOMINAL TORQUE PER LOW-SPEED SHAFT = 23540 NM; MAX. INPUT SPEED = 1600 1/MIN; GEOMETRY OF HIGH-SPEED SHAFT: D160MM; GEOMETRY OF LOW-SPEED SHAFT: D230MM;
	2LP1440-0PL32-6QP1	FLENDER MUD PUMP TYPE S1HZ SIZE 1320; AXIAL DISTANCE: 1320 MM; RATIO = 6.670; NOMINAL TORQUE PER LOW-SPEED SHAFT = 77,200 NM; MAX. INPUT SPEED = 1600 1/MIN; GEOMETRY OF HIGH-SPEED SHAFT: D107.808X123.14, 2GRD58'53''; GEOMETRY OF LOW-SPEED SHAFT: D230MM;
	2LP1440-0PL34-2KD8	FLENDER MUD PUMP TYPE S1HZ SIZE 1320; AXIAL DISTANCE: 1320 MM; RATIO = 8.368; NOMINAL TORQUE PER LOW-SPEED SHAFT = 95,500 NM; MAX. INPUT SPEED = 1600 1/MIN; GEOMETRY OF HIGH-SPEED SHAFT: D107.808X123.14, 2GRD58'53''; GEOMETRY OF LOW-SPEED SHAFT: D230MM;
	2LP1732-1GW10-2WU6	FLENDER HELICAL GEAR UNIT WITH EXTENDED DISTANCE BETWEEN AXLES; TYPE: K3SH, SIZE: 121; TORQUE SUPPORT: FOUNDATION LINE-UP; DESIGN: I; RATED TORQUE: 420,000 NM; RATIO: 56.314; BEARING-MODEL: HEAVY DUTY BEARINGS;