Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP1170-0AA01-1HL3

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear units for high thrust forces; Type: 073F, Size: 6100; Rated torque for each rotating shaft: 6,100 Nm; Centre distance between slow-moving shafts: 72.5 mm; Actual ratio: 4.05; Geometry slow-moving shaft: W60x2x28x9e DIN 5480;

Similar items in same category:

	2LP1040-0PL60-5HH0	FLENDER THERMALLY OPTIMIZED BEVEL-HELICAL GEAR UNIT; TYPE: B2SE, SIZE: 20; DESIGN: F; RATED TORQUE: 295,000 NM; RATIO: 12.462;
	2LP1170-0AA00-0AA0	FLENDER Helical gear units for high thrust forces; Type: 073F, Size: 6100; Rated torque for each rotating shaft: 6,100 Nm; Centre distance between slow-moving shafts: 72.5 mm; Actual ratio: 1.27; Geometry slow-moving shaft: W60x2x28x9e DIN 5480;
	2LP1170-0AA00-3LD4	FLENDER Helical gear units for high thrust forces; Type: 073F, Size: 6100; Rated torque for each rotating shaft: 6,100 Nm; Centre distance between slow-moving shafts: 72.5 mm; Actual ratio: 1.471; Geometry slow-moving shaft: W60x2x28x9e DIN 5480;
	2LP1170-0AA00-6WG8	FLENDER Helical gear units for high thrust forces; Type: 073F, Size: 6100; Rated torque for each rotating shaft: 6,100 Nm; Centre distance between slow-moving shafts: 72.5 mm; Actual ratio: 1.8; Geometry slow-moving shaft: W60x2x28x9e DIN 5480;
	2LP1170-0AK60-0TS2	FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 1.806; Geometry slow-moving shaft: W75x2x36x9e DIN 5480;
	2LP1170-0AK60-4EV6	FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 2.48; Geometry slow-moving shaft: W75x2x36x9e DIN 5480;
	2LP1170-0AK60-7RA1	FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 3.08; Geometry slow-moving shaft: W75x2x36x9e DIN 5480;
	2LP1170-0AK61-2CD5	FLENDER Helical gear units for high thrust forces; Type: 092F, Size: 12250; Rated torque for each rotating shaft: 12,250 Nm; Centre distance between slow-moving shafts: 91.5 mm; Actual ratio: 3.478; Geometry slow-moving shaft: W75x2x36x9e DIN 5480;