Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-2ML26-6WY7

2LP0800-2ML26-6WY7

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-2ML13-4UE5 2LP0800-2ML13-4UE5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2ML13-4UM6 2LP0800-2ML13-4UM6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2ML14-2RM4 2LP0800-2ML14-2RM4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2ML14-2RU5 2LP0800-2ML14-2RU5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2ML26-6XG8 2LP0800-2ML26-6XG8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2ML27-4UG6 2LP0800-2ML27-4UG6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2ML27-4UP7 2LP0800-2ML27-4UP7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 24.251; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2NA12-7FH6 2LP0800-2NA12-7FH6 FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 6; Positioning: Transverse; Design: A; Rated torque: 14,500 Nm; Ratio: 97.572; Dynamic load rating of axial bearing Cdyn: 1,630 kN;