Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-2KM53-6WC0

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: D; Rated torque: 14,300 Nm; Ratio: 24.212; Dynamic load rating of axial bearing Cdyn: 1,630 kN;

Similar items in same category:

	2LP0800-2KM40-4TG7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: C; Rated torque: 14,300 Nm; Ratio: 24.212; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2KM52-8YM0	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: D; Rated torque: 14,300 Nm; Ratio: 24.212; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2KM52-8YU1	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: D; Rated torque: 14,300 Nm; Ratio: 24.212; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2KM53-6VT8	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: D; Rated torque: 14,300 Nm; Ratio: 24.212; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
	2LP0800-2KM66-2CG2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 36.366; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2KM66-2CP3	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 36.366; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-2KM66-8YP1	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 36.366; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-2KM66-8YW2	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 36.366; NOMINAL TORQUE AT LOW-SPEED SHAFT = 75,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;