Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-2HW80-4JP0

2LP0800-2HW80-4JP0

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-2HW66-2FT7 2LP0800-2HW66-2FT7 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 6; Positioning: Transverse; Design: D; Rated torque: 13,500 Nm; Ratio: 21.681; Dynamic load rating of axial bearing Cdyn: 1,630 kN;
2LP0800-2HW78-6LY0 2LP0800-2HW78-6LY0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2HW78-6MG1 2LP0800-2HW78-6MG1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2HW80-4JF8 2LP0800-2HW80-4JF8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2HX02-8PT2 2LP0800-2HX02-8PT2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2HX02-8QB3 2LP0800-2HX02-8QB3 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-2HX03-6MB1 2LP0800-2HX03-6MB1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-2HX03-6MJ2 2LP0800-2HX03-6MJ2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 12; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 12.773; NOMINAL TORQUE AT LOW-SPEED SHAFT = 69,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;