Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1YP71-4WS8

2LP0800-1YP71-4WS8

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-1YP57-2TX6 2LP0800-1YP57-2TX6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1YP57-2UF7 2LP0800-1YP57-2UF7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1YP58-0RF5 2LP0800-1YP58-0RF5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1YP58-0RN6 2LP0800-1YP58-0RN6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1YP71-4XB0 2LP0800-1YP71-4XB0 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1YP72-2UA7 2LP0800-1YP72-2UA7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1YP72-2UH8 2LP0800-1YP72-2UH8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 70.041; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1YP84-7AN1 2LP0800-1YP84-7AN1 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 79.046; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;