Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-1XV78-8EQ0

Manufacturer: SIEMENS

Price: On Request

FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 11,600 Nm; Ratio: 86.806; Dynamic load rating of axial bearing Cdyn: 1,560 kN;

Similar items in same category:

	2LP0800-1XV65-6BU7	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 5; Positioning: Upright; Design: E/F; Rated torque: 11,600 Nm; Ratio: 86.806; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1XV78-1HA0	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 11,600 Nm; Ratio: 86.806; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1XV78-1HH1	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 11,600 Nm; Ratio: 86.806; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1XV78-8EG8	FLENDER Helical gear unit for large axial forces; Type: E3HA, Size: 5; Positioning: Upright; Design: G/H; Rated torque: 11,600 Nm; Ratio: 86.806; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1YK10-2DE0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 31.894; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1YK10-2DM1	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 31.894; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1YK11-0AL8	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 31.894; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1YK11-0AU0	FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 31.894; NOMINAL TORQUE AT LOW-SPEED SHAFT = 43,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;