Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1WY30-7RN6

2LP0800-1WY30-7RN6

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 22.824; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-1WY16-5NT4 2LP0800-1WY16-5NT4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 22.824; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1WY16-5PB5 2LP0800-1WY16-5PB5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 22.824; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1WY30-0UF7 2LP0800-1WY30-0UF7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 22.824; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1WY30-0UN8 2LP0800-1WY30-0UN8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 22.824; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1WY30-7RV7 2LP0800-1WY30-7RV7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 22.824; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1WY43-2XB0 2LP0800-1WY43-2XB0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 24.212; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1WY43-2XJ1 2LP0800-1WY43-2XJ1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 24.212; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1WY44-0UH8 2LP0800-1WY44-0UH8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 10; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 24.212; NOMINAL TORQUE AT LOW-SPEED SHAFT = 39,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;