Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1SN18-6SY6

2LP0800-1SN18-6SY6

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 89.05; NOMINAL TORQUE AT LOW-SPEED SHAFT = 33,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-1SN05-4QE4 2LP0800-1SN05-4QE4 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 89.05; NOMINAL TORQUE AT LOW-SPEED SHAFT = 33,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1SN06-2ME2 2LP0800-1SN06-2ME2 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 89.05; NOMINAL TORQUE AT LOW-SPEED SHAFT = 33,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1SN06-2MM3 2LP0800-1SN06-2MM3 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 89.05; NOMINAL TORQUE AT LOW-SPEED SHAFT = 33,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1SN18-6SR5 2LP0800-1SN18-6SR5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 89.05; NOMINAL TORQUE AT LOW-SPEED SHAFT = 33,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1SN20-4PY4 2LP0800-1SN20-4PY4 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 89.05; NOMINAL TORQUE AT LOW-SPEED SHAFT = 33,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1SN20-4QG5 2LP0800-1SN20-4QG5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 9; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 89.05; NOMINAL TORQUE AT LOW-SPEED SHAFT = 33,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1TJ08-1WS3 2LP0800-1TJ08-1WS3 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: A/B; Rated torque: 10,700 Nm; Ratio: 6.286; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
2LP0800-1TJ08-1XA4 2LP0800-1TJ08-1XA4 FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Upright; Design: A/B; Rated torque: 10,700 Nm; Ratio: 6.286; Dynamic load rating of axial bearing Cdyn: 1,560 kN;