Nothing found.

[[ item.description.prodDescription ]]

* Search is limited to the first 500 results. Please refine your criteria if necessary.

This Product is on your Inquiry List.

2LP0800-1HG61-0XG0

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 8.887; NOMINAL TORQUE AT LOW-SPEED SHAFT = 24,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:

	2LP0800-1HG46-7UL7	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: D; Rated torque: 10,900 Nm; Ratio: 22.006; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1HG47-5RL5	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: D; Rated torque: 10,900 Nm; Ratio: 22.006; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1HG47-5RT6	FLENDER Helical gear unit for large axial forces; Type: E2HA, Size: 5; Positioning: Transverse; Design: D; Rated torque: 10,900 Nm; Ratio: 22.006; Dynamic load rating of axial bearing Cdyn: 1,560 kN;
	2LP0800-1HG61-0WX8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 8.887; NOMINAL TORQUE AT LOW-SPEED SHAFT = 24,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1HG61-7UF7	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 8.887; NOMINAL TORQUE AT LOW-SPEED SHAFT = 24,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1HG61-7UN8	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 8.887; NOMINAL TORQUE AT LOW-SPEED SHAFT = 24,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
	2LP0800-1HG74-3AT1	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 8.887; NOMINAL TORQUE AT LOW-SPEED SHAFT = 24,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
	2LP0800-1HG74-3BB2	FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 8; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 8.887; NOMINAL TORQUE AT LOW-SPEED SHAFT = 24,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;