Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1CH15-3WK4

2LP0800-1CH15-3WK4

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-1CH02-1TQ2 2LP0800-1CH02-1TQ2 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1CH02-1TX3 2LP0800-1CH02-1TX3 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1CH02-8QX1 2LP0800-1CH02-8QX1 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1CH02-8RF2 2LP0800-1CH02-8RF2 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1CH15-3WS5 2LP0800-1CH15-3WS5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1CH16-1TS3 2LP0800-1CH16-1TS3 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1CH16-1UA4 2LP0800-1CH16-1UA4 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1CH28-6AE6 2LP0800-1CH28-6AE6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 34.291; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;