Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1BJ65-6NE7

2LP0800-1BJ65-6NE7

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-1AU80-6EV8 2LP0800-1AU80-6EV8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AU80-6FE0 2LP0800-1AU80-6FE0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1BJ64-8QW8 2LP0800-1BJ64-8QW8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1BJ64-8RF0 2LP0800-1BJ64-8RF0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1BJ65-6NM8 2LP0800-1BJ65-6NM8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1BJ78-1TS1 2LP0800-1BJ78-1TS1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1BJ78-1UA2 2LP0800-1BJ78-1UA2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1BJ78-8RA0 2LP0800-1BJ78-8RA0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;