Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1AU78-8HP0

2LP0800-1AU78-8HP0

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-1AU65-6ET7 2LP0800-1AU65-6ET7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1AU65-6FB8 2LP0800-1AU65-6FB8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1AU66-4CB6 2LP0800-1AU66-4CB6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AU66-4CJ7 2LP0800-1AU66-4CJ7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AU78-8HW1 2LP0800-1AU78-8HW1 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1AU80-6EV8 2LP0800-1AU80-6EV8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AU80-6FE0 2LP0800-1AU80-6FE0 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 19.742; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1BJ64-8QW8 2LP0800-1BJ64-8QW8 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 20.982; NOMINAL TORQUE AT LOW-SPEED SHAFT = 18,600 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;