Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-1AR77-1WS5

2LP0800-1AR77-1WS5

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;

Similar items in same category:
2LP0800-1AR63-8TX3 2LP0800-1AR63-8TX3 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1AR63-8UF4 2LP0800-1AR63-8UF4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1AR64-6RF2 2LP0800-1AR64-6RF2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AR64-6RN3 2LP0800-1AR64-6RN3 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AR77-1XA6 2LP0800-1AR77-1XA6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-1AR77-8UA4 2LP0800-1AR77-8UA4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AR77-8UH5 2LP0800-1AR77-8UH5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 10.648; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-1AS01-4AM7 2LP0800-1AS01-4AM7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 7; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 11.807; NOMINAL TORQUE AT LOW-SPEED SHAFT = 19,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;