Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-0YB50-6UQ6

2LP0800-0YB50-6UQ6

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-0YB36-4RV4 2LP0800-0YB36-4RV4 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: D; RATIO = 56.033; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0YB48-8XA6 2LP0800-0YB48-8XA6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0YB48-8XH7 2LP0800-0YB48-8XH7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0YB50-6UH5 2LP0800-0YB50-6UH5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: A; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0YB63-2AU8 2LP0800-0YB63-2AU8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0YB63-2BD0 2LP0800-0YB63-2BD0 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0YB63-8XC7 2LP0800-0YB63-8XC7 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0YB63-8XK8 2LP0800-0YB63-8XK8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 7; POSITIONING: TRANSVERSE; DESIGN: B; RATIO = 62.867; NOMINAL TORQUE AT LOW-SPEED SHAFT = 20,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;