Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-0SX11-8QM4

2LP0800-0SX11-8QM4

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-0SW87-6MS2 2LP0800-0SW87-6MS2 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: G/H; RATIO = 10.724; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0SX11-1SW4 2LP0800-0SX11-1SW4 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0SX11-1TE5 2LP0800-0SX11-1TE5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0SX11-8QE3 2LP0800-0SX11-8QE3 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0SX24-3VR6 2LP0800-0SX24-3VR6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0SX24-3VY7 2LP0800-0SX24-3VY7 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0SX25-1SY5 2LP0800-0SX25-1SY5 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0SX25-1TG6 2LP0800-0SX25-1TG6 FLENDER SINGLE SCREW EXTRUDER TYPE: E2HA, SIZE: 6; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 12.397; NOMINAL TORQUE AT LOW-SPEED SHAFT = 13,500 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;