Automation-Berlin Kunz GmbH Logo
  • Language:
  •  
  •  
  •  
+49 (30) 93663981
Mon-Fri: 8:30am - 6:00pm
Automation-Berlin Kunz GmbH - Partner of Siemens for Process Instrumentation
... best spare parts for automation and industry
Nothing found.
» [[ item.partno ]]
[[ item.description.prodDescription ]]
* Search is limited to the first 500 results. Please refine your criteria if necessary.
2LP0800-0MW78-0YR7

2LP0800-0MW78-0YR7

Manufacturer: SIEMENS

Price: On Request

FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;

Similar items in same category:
2LP0800-0MW64-7VW5 2LP0800-0MW64-7VW5 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0MW64-7WE6 2LP0800-0MW64-7WE6 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: A/B; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0MW77-3CJ8 2LP0800-0MW77-3CJ8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0MW77-3CS0 2LP0800-0MW77-3CS0 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0MW78-0YY8 2LP0800-0MW78-0YY8 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: C/D; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 6885/1;
2LP0800-0MX01-5FE1 2LP0800-0MX01-5FE1 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW END FACE; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0MX01-5FM2 2LP0800-0MX01-5FM2 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 5480;
2LP0800-0MX02-3CM0 2LP0800-0MX02-3CM0 FLENDER SINGLE SCREW EXTRUDER TYPE: E3HA, SIZE: 5; POSITIONING: UPRIGHT; DESIGN: E/F; RATIO = 43.745; NOMINAL TORQUE AT LOW-SPEED SHAFT = 11,000 NM; SCREW CONTACT: SCREW SHOULDER; SHAFT-HUB-CONNECTION: DIN 6885/1;