Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
2LP0694-.FA.0-0AA0
Manufacturer: SIEMENS
Price: On Request
FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RR Size: 30; nominal ratio iN = 25; actual ratio i = 25.07; with intermediate bevel helical gear motor KAF 48 (separate purchase order item necessary); actual ratio i = 7.22; total ratio iG = 181.005; output: flanged shaft (mm): G7 = 119.5, d6 = 250, d5 = 210, d7xm = D22x10, d4 = 165 k6, b5 = 12, b6 = 20; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1;
Similar items in same category:
2LP0694-.EH.0-0C.0 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RC Size: 60; nominal ratio iN = 30; actual ratio i = 30.00; input shaft dimensions (mm): d1 x l1 = 60 m6 x 110, G1 = 535; output: flanged shaft (mm): G7 = 166.5, d6 = 440, d5 = 380, d7xm = D33x16, d4 = 315 k6, b5 = 12, b6 = 27.5; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; | |
2LP0694-.EH.0-0D.0 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RC Size: 60; nominal ratio iN = 33.5; actual ratio i = 33.52; input shaft dimensions (mm): d1 x l1 = 60 m6 x 110, G1 = 535; output: flanged shaft (mm): G7 = 166.5, d6 = 440, d5 = 380, d7xm = D33x16, d4 = 315 k6, b5 = 12, b6 = 27.5; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; | |
2LP0694-.EH.0-0E.0 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RC Size: 60; nominal ratio iN = 38; actual ratio i = 38.22; input shaft dimensions (mm): d1 x l1 = 60 m6 x 110, G1 = 535; output: flanged shaft (mm): G7 = 166.5, d6 = 440, d5 = 380, d7xm = D33x16, d4 = 315 k6, b5 = 12, b6 = 27.5; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; | |
2LP0694-.EH.0-0F.0 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RC Size: 60; nominal ratio iN = 45; actual ratio i = 44.80; input shaft dimensions (mm): d1 x l1 = 60 m6 x 110, G1 = 535; output: flanged shaft (mm): G7 = 166.5, d6 = 440, d5 = 380, d7xm = D33x16, d4 = 315 k6, b5 = 12, b6 = 27.5; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; | |
2LP0694-.FA.0-0AA1 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RR Size: 30; nominal ratio iN = 25; actual ratio i = 25.07; with intermediate bevel helical gear motor KAF 48 (separate purchase order item necessary); actual ratio i = 8.4; total ratio iG = 210.588; output: flanged shaft (mm): G7 = 119.5, d6 = 250, d5 = 210, d7xm = D22x10, d4 = 165 k6, b5 = 12, b6 = 20; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; | |
2LP0694-.FA.0-0AA2 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RR Size: 30; nominal ratio iN = 25; actual ratio i = 25.07; with intermediate bevel helical gear motor KAF 48 (separate purchase order item necessary); actual ratio i = 9.32; total ratio iG = 233.652; output: flanged shaft (mm): G7 = 119.5, d6 = 250, d5 = 210, d7xm = D22x10, d4 = 165 k6, b5 = 12, b6 = 20; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; | |
2LP0694-.FA.0-0AA3 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RR Size: 30; nominal ratio iN = 25; actual ratio i = 25.07; with intermediate bevel helical gear motor KAF 48 (separate purchase order item necessary); actual ratio i = 10.15; total ratio iG = 254.461; output: flanged shaft (mm): G7 = 119.5, d6 = 250, d5 = 210, d7xm = D22x10, d4 = 165 k6, b5 = 12, b6 = 20; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; | |
2LP0694-.FA.0-0AA4 | FLENDER standard industrial planetary gear unit acc. to catalog MD31,1, Type: O2RR Size: 30; nominal ratio iN = 25; actual ratio i = 25.07; with intermediate bevel helical gear motor KAF 48 (separate purchase order item necessary); actual ratio i = 11.35; total ratio iG = 284.545; output: flanged shaft (mm): G7 = 119.5, d6 = 250, d5 = 210, d7xm = D22x10, d4 = 165 k6, b5 = 12, b6 = 20; Gear unit with declaration of compliance with the order acc.to DIN EN 10204-2,1; |