Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
2LP0170-0CN01-5XR6
Manufacturer: SIEMENS
Price: On Request
FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 23; Rated torque for each rotating shaft: 2,250 Nm; Centre distance between slow-moving shafts: 50 mm; Actual ratio: 2.259; Geometry slow-moving shaft: W40x1.25x30x9d DIN 5480;
Similar items in same category:
2LP0170-0CC31-8QC8 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 15; Rated torque for each rotating shaft: 1,470 Nm; Centre distance between slow-moving shafts: 41.5 mm; Actual ratio: 4.1; Geometry slow-moving shaft: W34x1.25x25x9d DIN 5480; | |
2LP0170-0CN00-4QF3 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 23; Rated torque for each rotating shaft: 2,250 Nm; Centre distance between slow-moving shafts: 50 mm; Actual ratio: 1.256; Geometry slow-moving shaft: W40x1.25x30x9d DIN 5480; | |
2LP0170-0CN00-8BJ7 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 23; Rated torque for each rotating shaft: 2,250 Nm; Centre distance between slow-moving shafts: 50 mm; Actual ratio: 1.378; Geometry slow-moving shaft: W40x1.25x30x9d DIN 5480; | |
2LP0170-0CN01-2MN2 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 23; Rated torque for each rotating shaft: 2,250 Nm; Centre distance between slow-moving shafts: 50 mm; Actual ratio: 1.588; Geometry slow-moving shaft: W40x1.25x30x9d DIN 5480; | |
2LP0170-0CN02-0JV1 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 23; Rated torque for each rotating shaft: 2,250 Nm; Centre distance between slow-moving shafts: 50 mm; Actual ratio: 4.05; Geometry slow-moving shaft: W40x1.25x30x9d DIN 5480; | |
2LP0170-0CN02-3UY5 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 23; Rated torque for each rotating shaft: 2,250 Nm; Centre distance between slow-moving shafts: 50 mm; Actual ratio: 3.087; Geometry slow-moving shaft: W40x1.25x30x9d DIN 5480; | |
2LP0170-0CX60-5JX5 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 51; Rated torque for each rotating shaft: 5,100 Nm; Centre distance between slow-moving shafts: 62.5 mm; Actual ratio: 1.27; Geometry slow-moving shaft: W52x2x24x9d DIN 5480; | |
2LP0170-0CX60-8VC0 | FLENDER Helical gear units for high thrust forces; Type: T1FR, Size: 51; Rated torque for each rotating shaft: 5,100 Nm; Centre distance between slow-moving shafts: 62.5 mm; Actual ratio: 1.8; Geometry slow-moving shaft: W52x2x24x9d DIN 5480; |