Searching...
Nothing found.
[[ item.description.prodDescription ]]
This Product is on your Inquiry List.
1FE1094-4LW01-7NW8-ZV22X26
Manufacturer: SIEMENS
Price: On Request
.
Similar items in same category:
1FE1094-4.U.1-3W.. | SIMOTICS M Built-in synchronous motor Spare part only rotor DC link 600V, 105K, IP00, 4-pole 95Nm, In=45A, 18kW NN=1800rpm, Nmax=10000rpm VPM required | |
1FE1094-4.U.1-6... | SIMOTICS M Built-in synchronous motor DC link 600V, 105K, IP00, 4-pole Individual components: rotor stator, 95Nm, In=45A, 18kW NN=1800rpm, Nmax=10000rpm VPM required Temperature sensor Pt1000 | |
1FE1094-4.U.1-7.W. | SIMOTICS M Built-in synchronous motor Spare part only stator DC link 600V, 105K, IP00, 4-pole 95Nm, In=45A, 18kW NN=1800rpm, Nmax=10000rpm VPM required Temperature sensor Pt1000 | |
1FE1094-4LW01-2NW8-ZV22X26 | . | |
1FE1094-4WD11-1NA0-ZV80 | SIMOTICS M Built-in synchronous motor Individual components: rotor stator, 37.5kW, 89.5Nm NN=4000rpm, Nmax=18000rpm water cooling Encapsulated winding Standard protection (KTY) SPECIAL STATOR, only with Z option without rotor sleeve Bare cable ends, L=1.5m VPM required V80: Stator without cooling jacket | |
1FE1094-4WD11-6NA0-ZV80 | SIMOTICS M Built-in synchronous motor Individual components: rotor stator, 37.5kW, 89.5Nm NN=4000rpm, Nmax=18000rpm water cooling Encapsulated winding Standard protection (Pt1000) SPECIAL STATOR, only with Z option without rotor sleeve Bare cable ends, L=1.5m VPM required V80: Stator without cooling jacket | |
1FE1094-4WD31-1NN0-ZT15+V80 | SIMOTICS M BUILT-IN SYNCHRONOUS MOTOR, DC LINK 600V, 105K, IP00,4-POLE SINGLE COMPONENTS: ROTOR, STATOR, 37,5KW, 89,5NM, IN=108A NN=4000 RPM, NMAX=18000 RPM VPM REQUIRED WATER COOLING SYSTEM FULLY PROTECTION (KTY+PTC) V80: W/O COOLING JACKET WITH OVERHANG ENCAPSULATION T15: ROTOR SLEEVE; D=67MM; BALANCING QUALITY G2.5; FREE CABLE END L=1,5M; | |
1FE1094-4WD31-1NN0-ZT15V80 | SIMOTICS M Built-in synchronous motor DC link 600V, 105K, IP00, 4-pole Individual components: rotor stator, 37.5 kW, 89.5Nm, In=108A NN=4000rpm, Nmax=18000rpm VPM required; Water-cooled; Full protection (KTY+PTC); V80: Without cooling jacket With overhead encapsulation T15: Rotor sleeve D=67mm; Balance quality G2.5; Bare cable ends L=1.5m |